So can you as long as you buy our 350-401 Actual Tests exam braindumps. Propulsion occurs when using our 350-401 Actual Tests preparation quiz. They can even broaden amplitude of your horizon in this line. Goldmile-Infobiz, as a provider, specializing in providing all candidates with IT exam-related materials,focus on offering the most excellent dumps for the candidates. In contrast with other websites, Goldmile-Infobiz is more trustworthy. With our 350-401 Actual Tests study questions for 20 to 30 hours, then you can be confident to pass the exam for sure.
CCNP Enterprise 350-401 Now let our Goldmile-Infobiz help you!
CCNP Enterprise 350-401 Actual Tests - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) And you can easily download the demos on our website. Goldmile-Infobiz insists on providing you with the best and high quality exam dumps, aiming to ensure you 100% pass in the actual test. Being qualified with Cisco certification will bring you benefits beyond your expectation.
To pass the 350-401 Actual Tests exam, careful planning and preparation are crucial to its realization. Of course, the path from where you are to where you want to get is not always smooth and direct. Therefore, this is the point of our 350-401 Actual Tests exam materials, designed to allow you to spend less time and money to easily pass the exam.
Cisco 350-401 Actual Tests - it can help you to pass the IT exam.
The great advantage of our 350-401 Actual Tests study prep is that we offer free updates for one year long. On one hand, these free updates can greatly spare your money since you have the right to free download 350-401 Actual Tests real dumps as long as you need to. On the other hand, we offer this after-sales service to all our customers to ensure that they have plenty of opportunities to successfully pass their 350-401 Actual Tests actual exam and finally get their desired certification of 350-401 Actual Tests practice materials.
To pass the Cisco 350-401 Actual Tests exam, in fact, is not so difficult, the key is what method you use. Goldmile-Infobiz's Cisco 350-401 Actual Tests exam training materials is a good choice.
350-401 PDF DEMO:
QUESTION NO: 1
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 2
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 3
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 4
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
CheckPoint 156-561 - In every area, timing counts importantly. To get the Cisco Huawei H28-315_V1.0 exam certification is the goal of many IT people & Network professionals. Linux Foundation CNPA - Our experts check whether there is an update on the Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) exam questions every day, if an update system is sent to the customer automatically. SAP C_S4PM2_2507 - And don't worry about how to pass the test, Goldmile-Infobiz certification training will be with you. With our software version of our CIPS L5M1 guide braindumps, you can practice and test yourself just like you are in a real exam for our CIPS L5M1 study materials have the advandage of simulating the real exam.
Updated: May 28, 2022