In our software version of the 350-401 Braindumps Questions exam dumps, the unique point is that you can take part in the practice test before the real 350-401 Braindumps Questions exam. You never know what you can get till you try. It is universally acknowledged that mock examination is of great significance for those who are preparing for the exam since candidates can find deficiencies of their knowledge as well as their shortcomings in the practice test, so that they can enrich their knowledge before the real 350-401 Braindumps Questions exam. There is a lot of data to prove that our 350-401 Braindumps Questions practice guide has achieved great success. First of all, in terms of sales volume, our 350-401 Braindumps Questions study materials are far ahead in the industry, and here we would like to thank the users for their support. We will tailor services to different individuals and help them take part in their aimed exams after only 20-30 hours practice and training.
CCNP Enterprise 350-401 Boring life will wear down your passion for life.
The 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Braindumps Questions exam questions have simplified the sophisticated notions. They never give up learning new things. Every time they try our new version of the 350-401 Latest Practice Questions Files real exam, they will write down their feelings and guidance.
As far as we are concerned, the key to quick upward mobility lies in adapting your excellent personality to the style of the organization you are working in. Our 350-401 Braindumps Questions exam materials embrace much knowledge and provide relevant 350-401 Braindumps Questions exam bank available for your reference, which matches your learning habits and produces a rich harvest of the 350-401 Braindumps Questions exam knowledge. As long as you buy our 350-401 Braindumps Questions study guide, you will be benefited from it!
Cisco 350-401 Braindumps Questions - Moreover, we have Demos as freebies.
We are aware that the IT industry is a new industry. It is one of the chain to drive economic development. So its status can not be ignored. IT certification is one of the means of competition in the IT industry. Passed the certification exam you will get to a good rise. But pass the exam is not easy. It is recommended that using training tool to prepare for the exam. If you want to choose this certification training resources, Goldmile-Infobiz's Cisco 350-401 Braindumps Questions exam training materials will be the best choice. The success rate is 100%, and can ensure you pass the exam.
According to your need, you can choose the most suitable version of our Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) guide torrent for yourself. The three different versions have different functions.
350-401 PDF DEMO:
QUESTION NO: 1
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 2
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 3
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 5
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
Cisco HP HPE0-J68-KR exam training materials are the learning materials that each candidate must have. Of course, a lot of problems such as soft test engine appeared some faults or abnormal stating run phenomenon of our Microsoft MB-280 exam question, these problems cannot be addressed by simple language, we will service a secure remote assistance for users and help users immediate effectively solve the existing problems of our Microsoft MB-280 torrent prep, thus greatly enhance the user experience, beneficial to protect the user's learning resources and use digital tools, let users in a safe and healthy environment to study Microsoft MB-280 exam question. Huawei H25-631_V1.0 - About the above problem, how should I do? Is there shortcut to pass the exam? Do you have such a mood like that, now? There is no need for hurry. Amazon MLA-C01-KR - They can not only achieve this, but ingeniously help you remember more content at the same time. What do you think of Cisco Cisco 350-401 certification exam? As one of the most popular Cisco certification exams, Cisco 350-401 test is also very important.
Updated: May 28, 2022