The purpose of providing demo is to let customers understand our part of the topic and what is the form of our 350-401 Exam Blueprint study materials when it is opened. In our minds, these two things are that customers who care about the 350-401 Exam Blueprint exam may be concerned about most. And you can click all three formats of our 350-401 Exam Blueprint exam dumps to see. If you are used to reading paper with our 350-401 Exam Blueprint study materials for most of the time, you can eliminate your concerns. Our 350-401 Exam Blueprint exam quiz takes full account of customers' needs in this area. Our 350-401 Exam Blueprint learning questions are undeniable excellent products full of benefits, so our 350-401 Exam Blueprint exam materials can spruce up our own image and our exam questions are your best choice.
CCNP Enterprise 350-401 Just try and you will love them.
If you require any further information about either our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Exam Blueprint preparation exam or our corporation, please do not hesitate to let us know. 350-401 Reliable Test Cram Sheet File learning quiz according to your specific circumstances, for you to develop a suitable schedule and learning materials, so that you can prepare in the shortest possible time to pass the exam needs everything. If you use our 350-401 Reliable Test Cram Sheet File training prep, you only need to spend twenty to thirty hours to practice our 350-401 Reliable Test Cram Sheet File study materials and you are ready to take the exam.
Provided that you lose your exam with our 350-401 Exam Blueprint exam questions unfortunately, you can have full refund or switch other version for free. All the preoccupation based on your needs and all these explain our belief to help you have satisfactory and comfortable purchasing services on the 350-401 Exam Blueprint study guide. We assume all the responsibilities our 350-401 Exam Blueprint simulating practice may bring you foreseeable outcomes and you will not regret for believing in us assuredly.
Cisco 350-401 Exam Blueprint study material is suitable for all people.
If you are an IT staff, do you want a promotion? Do you want to become a professional IT technical experts? Then please enroll in the Cisco 350-401 Exam Blueprint exam quickly. You know how important this certification to you. Do not worry about that you can't pass the exam, and do not doubt your ability. Join the Cisco 350-401 Exam Blueprint exam, then Goldmile-Infobiz help you to solve the all the problem to prepare for the exam. It is a professional IT exam training site. With it, your exam problems will be solved. Goldmile-Infobiz Cisco 350-401 Exam Blueprint exam training materials can help you to pass the exam easily. It has helped numerous candidates, and to ensure 100% success. Act quickly, to click the website of Goldmile-Infobiz, come true you IT dream early.
So a wise and diligent person should absorb more knowledge when they are still young. At present, our 350-401 Exam Blueprint study prep has gained wide popularity among different age groups.
350-401 PDF DEMO:
QUESTION NO: 1
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 2
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 3
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 4
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 5
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
Goldmile-Infobiz Cisco Microsoft MB-700 exam training materials can help you to pass the exam. The Open Group OGBA-101 - They can even broaden amplitude of your horizon in this line. ISTQB ISTQB-CTFL-KR - Why? Because Goldmile-Infobiz has many years of experience and our IT experts have been devoted themselves to the study of IT certification exam and summarize IT exam rules. Buying a set of the Microsoft AI-102-KR learning materials is not difficult, but it is difficult to buy one that is suitable for you. CIPS L5M1 - The exam dumps include all questions that can appear in the real exam.
Updated: May 28, 2022