If you purchase 350-401 Exam Cost exam questions and review it as required, you will be bound to successfully pass the exam. And if you still don't believe what we are saying, you can log on our platform right now and get a trial version of 350-401 Exam Cost study engine for free to experience the magic of it. Of course, if you encounter any problems during free trialing, feel free to contact us and we will help you to solve all problems on the 350-401 Exam Cost practice engine. You can use 350-401 Exam Cost soft test simulator on any other computer as you like offline. Besides, it supports Mobil and Ipad. Every day we are learning new knowledge, but also constantly forgotten knowledge before, can say that we have been in a process of memory and forger, but how to make our knowledge for a long time high quality stored in our minds? This requires a good memory approach, and the 350-401 Exam Cost study braindumps do it well.
CCNP Enterprise 350-401 Choosing our products is choosing success.
CCNP Enterprise 350-401 Exam Cost - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Experts call them experts, and they must have their advantages. There are many advantages of our 350-401 Practice Test Pdf pdf torrent: latest real questions, accurate answers, instantly download and high passing rate. You can totally trust our 350-401 Practice Test Pdf practice test because all questions are created based on the requirements of the certification center.
Unlike other 350-401 Exam Cost study materials, there is only one version and it is not easy to carry. Our 350-401 Exam Cost exam questions mainly have three versions which are PDF, Software and APP online, and for their different advantafes, you can learn anywhere at any time. And the prices of our 350-401 Exam Cost training engine are reasonable for even students to afford and according to the version that you want to buy.
Our Cisco 350-401 Exam Cost exam questions are often in short supply.
With 350-401 Exam Cost practice materials, you don't need to spend a lot of time and effort on reviewing and preparing. For everyone, time is precious. Office workers and mothers are very busy at work and home; students may have studies or other things. Using 350-401 Exam Cost guide questions, you only need to spend a small amount of time to master the core key knowledge, pass the 350-401 Exam Cost exam, and get a certificate.
Once it is time to submit your exercises, the system of the 350-401 Exam Cost preparation exam will automatically finish your operation. After a several time, you will get used to finish your test on time.
350-401 PDF DEMO:
QUESTION NO: 1
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 2
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 3
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 4
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
Palo Alto Networks PSE-Cortex - Goldmile-Infobiz's braindumps provide you the gist of the entire syllabus in a specific set of questions and answers. We sincerely hope that you can pay more attention to our IBM C1000-200 study questions. Learning our ASQ CSSBB study quiz can also be a pleasant process. Our SAP C-ARSUM-2508 learning questions will inspire your motivation to improve yourself. To other workers who want to keep up with the time and being competent in today’s world, you are also looking for some effective Microsoft PL-400-KR exam prep as well.
Updated: May 28, 2022