If you want time - saving and efficient learning, our 350-401 Vce File exam questions are definitely your best choice. And if you buy our 350-401 Vce File learning braindumps, you will be bound to pass for our 350-401 Vce File study materials own the high pass rate as 98% to 100%. We can send you a link within 5 to 10 minutes after your payment. You can save so much time and energy to do other things that you will make best use of you time. Goldmile-Infobiz is the preeminent platform, which offers 350-401 Vce File exam materials duly equipped by experts. The PC version is ideal for computers with windows systems, which can simulate a real test environment.
CCNP Enterprise 350-401 Goldmile-Infobiz have a huge senior IT expert team.
The industrious Goldmile-Infobiz's IT experts through their own expertise and experience continuously produce the latest Cisco 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Vce File training materials to facilitate IT professionals to pass the Cisco certification 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Vce File exam. Moreover, we also provide you with a year of free after-sales service to update the exam practice questions and answers. Do not hesitate!
If you Goldmile-Infobiz, Goldmile-Infobiz can ensure you 100% pass Cisco certification 350-401 Vce File exam. If you fail to pass the exam, Goldmile-Infobiz will full refund to you.
Cisco 350-401 Vce File - Select Goldmile-Infobiz is to choose success.
What do you think of using Goldmile-Infobiz Cisco 350-401 Vce File exam dumps? Goldmile-Infobiz Cisco 350-401 Vce File certification training dumps, it may be said, is the most excellent reference materials among all exam-related reference materials. Why? There are four reasons in the following. Firstly, Goldmile-Infobiz exam dumps are researched by IT experts who used their experience for years and can figure out accurately the scope of the examinations. Secondly, Goldmile-Infobiz exam dumps conclude all questions that can appear in the real exam. Thirdly, Goldmile-Infobiz exam dumps ensures the candidate will pass their exam at the first attempt. If the candidate fails the exam, Goldmile-Infobiz will give him FULL REFUND. Fourthly, Goldmile-Infobiz exam dumps have two versions: PDF and SOFT version. With the two versions, the candidates can pass their exam with ease.
A bad situation can show special integrity. When to face of a difficult time, only the bravest people could take it easy.
350-401 PDF DEMO:
QUESTION NO: 1
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 2
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 3
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 4
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
Different person has different goals, but our Goldmile-Infobiz aims to help you successfully pass ISACA CRISC exam. Goldmile-Infobiz Cisco Microsoft AI-102 exam training materials is the best choice to help you pass the exam. SAP C_ABAPD_2507 - We can be along with you in the development of IT industry. As one of the most important exam in Cisco certification exam, the certificate of Cisco DSCI DCPLA will give you benefits. Huawei H21-112_V2.0 - Most candidates purchase our products and will pass exam certainly.
Updated: May 28, 2022