350-401 Exam Dumps.Zip - Cisco 350-401 Online Test - Implementing Cisco Enterprise Network Core Technologies 350-401 Encor - Goldmile-Infobiz

We learned that a majority of the candidates for the 350-401 Exam Dumps.Zip exam are office workers or students who are occupied with a lot of things, and do not have plenty of time to prepare for the 350-401 Exam Dumps.Zip exam. Taking this into consideration, we have tried to improve the quality of our 350-401 Exam Dumps.Zip training materials for all our worth. Now, I am proud to tell you that our 350-401 Exam Dumps.Zip study dumps are definitely the best choice for those who have been yearning for success but without enough time to put into it. These professionals have an in-depth understanding of the candidate's questions and requirements, so our 350-401 Exam Dumps.Zip exam questions meets and exceeds your expectations. Learn and practice our exams so that you can easily pass candidates and have a valuable learning experience. We can assure you that you will get the latest version of our 350-401 Exam Dumps.Zip training materials for free from our company in the whole year after payment.

CCNP Enterprise 350-401 We believe that you will like our products.

The certification of Cisco 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Exam Dumps.Zip exam is what IT people want to get. In the process of using the Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) study question, if the user has some problems, the IT professor will 24 hours online to help users solve, the user can send email or contact us on the online platform. Of course, a lot of problems such as soft test engine appeared some faults or abnormal stating run phenomenon of our 350-401 Latest Exam Sample Online exam question, these problems cannot be addressed by simple language, we will service a secure remote assistance for users and help users immediate effectively solve the existing problems of our 350-401 Latest Exam Sample Online torrent prep, thus greatly enhance the user experience, beneficial to protect the user's learning resources and use digital tools, let users in a safe and healthy environment to study 350-401 Latest Exam Sample Online exam question.

100% satisfaction guarantee! As well as you memorize these questions and answers in our dumps, you must pass Cisco 350-401 Exam Dumps.Zip certification. Do you have registered for Cisco 350-401 Exam Dumps.Zip exam? With the drawing near of the examination, I still lack of confidence to pass 350-401 Exam Dumps.Zip test.

Cisco 350-401 Exam Dumps.Zip - Do not worry.

We truly treat our customers with the best quality service and the most comprehensive 350-401 Exam Dumps.Zip exam pdf, that's why we enjoy great popularity among most IT workers. When you want to learn something about the 350-401 Exam Dumps.Zip online training, our customer assisting will be available for you. We will offer you the best preparation materials regarding 350-401 Exam Dumps.Zip practice exam. You can totally trust our dumps and service.

However, if you choose the 350-401 Exam Dumps.Zip exam reference guide from our company, we are willing to help you solve your problem. There are a lot of IT experts in our company, and they are responsible to update the contents every day.

350-401 PDF DEMO:

QUESTION NO: 1
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.

QUESTION NO: 2
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.

QUESTION NO: 3
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html

QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.

QUESTION NO: 5
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.

If you really want to choose our Cisco Amazon CLF-C02-KR pdf torrents, we will give you the reasonable price and some discounts are available. Google Security-Operations-Engineer - By simulating enjoyable learning scenes and vivid explanations, users will have greater confidence in passing the qualifying exams. Try to practice Google Security-Operations-Engineer exam pdf with our test engine and you will get used to the atmosphere of the formal test easily. On the one hand, our company hired the top experts in each qualification examination field to write the Databricks Associate-Developer-Apache-Spark-3.5 prepare dump, so as to ensure that our products have a very high quality, so that users can rest assured that the use of our research materials. The content and displays of the ServiceNow CAD pass guide Which they have tailor-designed are absolutely more superior than the other providers'.

Updated: May 28, 2022