In addition, except 350-401 Exam Format, many other certification exams are also useful. The latest information of these tests can be found in our Goldmile-Infobiz. Sometimes a small step is possible to be a big step in life. You will never regret choosing our 350-401 Exam Format test answers as your practice materials because we will show you the most authoritative study guide. To ensure your 100% satisfaction, 350-401 Exam Format free demo are available for the certification exam you're going to take before you purchased. Our Cisco 350-401 Exam Format study material offers you high-quality training material and helps you have a good knowledge of the 350-401 Exam Format actual test.
CCNP Enterprise 350-401 Pass guaranteed; 5.
We have a lasting and sustainable cooperation with customers who are willing to purchase our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Exam Format actual exam. As we sell electronic files, there is no need to ship. After payment you can receive Valid 350-401 Exam Labs exam review questions you purchase soon so that you can study before.
We have testified more and more candidates’ triumph with our 350-401 Exam Format practice materials. We believe you will be one of the winners like them. With the high pass rate as 98% to 100%, we can proudly claim that we are unmatched in the market for our accurate and latest 350-401 Exam Format exam dumps.
Cisco 350-401 Exam Format - You can browser our official websites.
During nearly ten years, our 350-401 Exam Format exam questions have met with warm reception and quick sale in the international market. Our 350-401 Exam Format study materials are not only as reasonable priced as other makers, but also they are distinctly superior in the many respects. With tens of thousands of our loyal customers supporting us all the way, we believe we will do a better job in this career. More and more candidates will be benefited from our excellent 350-401 Exam Format training guide!
Our 350-401 Exam Format training prep was produced by many experts, and the content was very rich. At the same time, the experts constantly updated the contents of the 350-401 Exam Format study materials according to the changes in the society.
350-401 PDF DEMO:
QUESTION NO: 1
Which statement explains why Type 1 hypervisor is considered more efficient than Type 2 hypervisor?
A. Type 1 hypervisor enables other operating systems to run on it
B. Type 1 hypervisor runs directly on the physical hardware of the host machine without relying on the underlying OS
C. Type 1 hypervisor relics on the existing OS of the host machine to access CPU, memory, storage, and network resources.
D. Type 1 hypervisor is the only type of hypervisor that supports hardware acceleration techniques
Answer: B
Explanation:
There are two types of hypervisors: type 1 and type 2 hypervisor.
In type 1 hypervisor (or native hypervisor), the hypervisor is installed directly on the physical server.
Then instances of an operating system (OS) are installed on the hypervisor. Type 1 hypervisor has direct access to the hardware resources. Therefore they are more efficient than hosted architectures.
Some examples of type 1 hypervisor are VMware vSphere/ESXi, Oracle VM Server, KVM and
Microsoft Hyper-V.
In contrast to type 1 hypervisor, a type 2 hypervisor (or hosted hypervisor) runs on top of an operating system and not the physical hardware directly. A big advantage of Type 2 hypervisors is that management console software is not required.
QUESTION NO: 2
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID
QUESTION NO: 3
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 4
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 5
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
That is the reason why I want to recommend our Network Appliance NS0-005 prep guide to you, because we believe this is what you have been looking for. As long as you download our Microsoft AZ-305 practice engine, you will be surprised to find that Microsoft AZ-305 learning guide is well designed in every detail no matter the content or the displays. The Open Group OGEA-101 - You may try it! The service tenet of our company and all the staff work mission is: through constant innovation and providing the best quality service, make the IBM C1000-200 question guide become the best customers electronic test study materials. If you buy our HP HPE7-J02 test prep you will pass the exam easily and successfully，and you will realize you dream to find an ideal job and earn a high income.
Updated: May 28, 2022