You can use 350-401 Latest Testcollection soft test simulator on any other computer as you like offline. Besides, it supports Mobil and Ipad. If you don't delete it, you can use and practice forever. Every day we are learning new knowledge, but also constantly forgotten knowledge before, can say that we have been in a process of memory and forger, but how to make our knowledge for a long time high quality stored in our minds? This requires a good memory approach, and the 350-401 Latest Testcollection study braindumps do it well. The 350-401 Latest Testcollection prep guide adopt diversified such as text, images, graphics memory method, have to distinguish the markup to learn information, through comparing different color font, as well as the entire logical framework architecture, let users on the premise of grasping the overall layout, better clues to the formation of targeted long-term memory, and through the cycle of practice, let the knowledge more deeply printed in my mind. Choosing our products is choosing success.
CCNP Enterprise 350-401 They are professionals in every particular field.
There are many advantages of our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Latest Testcollection pdf torrent: latest real questions, accurate answers, instantly download and high passing rate. Our New 350-401 Test Guide exam questions mainly have three versions which are PDF, Software and APP online, and for their different advantafes, you can learn anywhere at any time. And the prices of our New 350-401 Test Guide training engine are reasonable for even students to afford and according to the version that you want to buy.
Your questions on 350-401 Latest Testcollection exam dumps will be answered accurately and quickly. We are still working hard to satisfy your demands. You will feel comfortable and pleasant to shop on such a good website.
Cisco 350-401 Latest Testcollection - The data are unique-particular in this career.
Our 350-401 Latest Testcollection real exam is written by hundreds of experts, and you can rest assured that the contents of the 350-401 Latest Testcollection study materials are contained. After obtaining a large amount of first-hand information, our experts will continue to analyze and summarize and write the most comprehensive 350-401 Latest Testcollection learning questions possible. And at the same time, we always keep our questions and answers to the most accurate and the latest.
All exam candidates make overt progress after using our 350-401 Latest Testcollection quiz torrent. By devoting ourselves to providing high-quality practice materials to our customers all these years, we can guarantee all content are the essential part to practice and remember.
350-401 PDF DEMO:
QUESTION NO: 1
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 2
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 3
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 4
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 5
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
Cisco 200-901 - You can see that so many people are already ahead of you! Huawei H25-522_V1.0 - Many people often feel that their memory is poor, and what they have learned will soon be forgotten. Microsoft AB-900 - We also received a lot of praise in the international community. Many clients worry that after they bought our Microsoft MD-102 exam simulation they might find the exam questions are outdated and waste their time, money and energy. Oracle 1Z0-1055-25 - As for its shining points, the PDF version can be readily downloaded and printed out so as to be read by you.
Updated: May 28, 2022