Of course, if you fail to pass the exam, we will give you a 100% full refund. Students are worried about whether the 350-401 Test Topics practice materials they have purchased can help them pass the exam and obtain a certificate. They often encounter situations in which the materials do not match the contents of the exam that make them waste a lot of time and effort. We can meet all the requirements of the user as much as possible, to help users better pass the qualifying exams. It is not hard to find that there are many different kinds of products in the education market now. Our experts have many years’ experience in this particular line of business, together with meticulous and professional attitude towards jobs.
CCNP Enterprise 350-401 Stop hesitation!
CCNP Enterprise 350-401 Test Topics - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) We have been studying for many years since kindergarten. If you are interested in our products, I believe that after your trial, you will certainly not hesitate to buy it. All consumers who are interested in Valid 350-401 Exam Guide guide materials can download our free trial database at any time by visiting our platform.
As the authoritative provider of 350-401 Test Topics guide training, we can guarantee a high pass rate compared with peers, which is also proved by practice. Our good reputation is your motivation to choose our learning materials. We guarantee that if you under the guidance of our 350-401 Test Topics study tool step by step you will pass the exam without a doubt and get a certificate.
Cisco 350-401 Test Topics - Of course, you can also experience it yourself.
As we all know, there are many reasons for the failure of the 350-401 Test Topics exam, such as chance, the degree of knowledge you master. Although the 350-401 Test Topics exam is an exam to test your mastery of the knowledge of 350-401 Test Topics, but there are so many factor to influence the result. As long as you choose our 350-401 Test Topics exam materials, you never have to worry about this problem. Because we will provide you a chance to replace other exam question bank if you didn’t pass the 350-401 Test Topics exam at once. What’s more important it’s that also free of charge only if you provide relevant proof. It is very convenient to replace and it's not complicated at all. It will not cause you any trouble.
With years of experience dealing with 350-401 Test Topics exam, they have thorough grasp of knowledge which appears clearly in our 350-401 Test Topics exam questions. All 350-401 Test Topics study materials you should know are written in them with three versions to choose from: the PDF, Software and APP online versions.
350-401 PDF DEMO:
QUESTION NO: 1
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 2
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 3
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 4
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 5
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID
Huawei H13-624_V5.5 - But in realistic society, some candidates always say that this is difficult to accomplish. Workday Workday-Pro-Talent-and-Performance - The rigorous world force us to develop ourselves, thus we can't let the opportunities slip away. Come and buy our EMC D-UN-DY-23 exam guide! However, our HP HPE3-CL02 real questions are high efficient priced with reasonable amount, acceptable to exam candidates around the world. Up to now, many people have successfully passed the PMI PMP-KR exam with our assistance.
Updated: May 28, 2022