Goldmile-Infobiz's braindumps provide you the gist of the entire syllabus in a specific set of questions and answers. These study questions are most likely to appear in the actual 350-401 100 Correct Answers exam. The Certification exams are actually set randomly from the database of 350-401 100 Correct Answers. All experts and professors of our company have been trying their best to persist in innovate and developing the 350-401 100 Correct Answers test training materials all the time in order to provide the best products for all people and keep competitive in the global market. We believe that the study materials will keep the top selling products. You just need to spend about twenty to thirty hours before taking the real 350-401 100 Correct Answers exam.
CCNP Enterprise 350-401 Just have a try and you will love them!
For our pass rate of our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) 100 Correct Answers practice engine which is high as 98% to 100% is tested and praised by our customers. The best way to gain success is not cramming, but to master the discipline and regular exam points of question behind the tens of millions of questions. Our 350-401 Reliable Test Cram preparation materials can remove all your doubts about the exam.
However, passing an 350-401 100 Correct Answers exam is not easy, and a large number of people fail to pass it every year, as is the case with the 350-401 100 Correct Answers exam. But if you choose to buy our 350-401 100 Correct Answers study materials, you will pass the exam easily. In the 21st century, all kinds of examinations are filled with the life of every student or worker.
Cisco 350-401 100 Correct Answers - The model test is very important.
Success is has method. You can be successful as long as you make the right choices. Goldmile-Infobiz's Cisco 350-401 100 Correct Answers exam training materials are tailored specifically for IT professionals. It can help you pass the exam successfully. If you're still catching your expertise to prepare for the exam, then you chose the wrong method. This is not only time-consuming and laborious, but also is likely to fail. But the remedy is not too late, go to buy Goldmile-Infobiz's Cisco 350-401 100 Correct Answers exam training materials quickly. With it, you will get a different life. Remember, the fate is in your own hands.
People always complain that they do nothing perfectly. The fact is that they never insist on one thing and give up quickly.
350-401 PDF DEMO:
QUESTION NO: 1
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 2
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 3
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID
QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
Microsoft PL-400 - You get what you want is one of the manifestations of success. And our pass rate of our Microsoft MS-102-KR exam braindumps is high as 98% to 100%. SAP C_S4CPR_2508 - If exam outline and the content change, Goldmile-Infobiz can provide you with the latest information. Through the practice of our Microsoft DP-900 exam questions, you can grasp the intention of the examination organization accurately. PMI CAPM - After you use our dumps, you will believe what I am saying.
Updated: May 28, 2022