And if you get any questions, please get contact with us, our staff will be online 24/7 to solve your problems all the way. Before you place orders, you can download the free demos of 350-401 Cost Effective Certification practice test as experimental acquaintance. Once you decide to buy, you will have many benefits like free update lasting one-year and convenient payment mode. Our company has done the research of the 350-401 Cost Effective Certification study material for several years, and the experts and professors from our company have created the famous 350-401 Cost Effective Certification learning dumps for all customers. We believe our products will meet all demand of all customers. Being the most competitive and advantageous company in the market, our 350-401 Cost Effective Certification practice quiz have help tens of millions of exam candidates realize their dreams all these years.
CCNP Enterprise 350-401 PDF Version is easy to read and print.
CCNP Enterprise 350-401 Cost Effective Certification - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) We have always advocated customer first. But if you are unfortunately to fail in the exam we will refund you in full immediately. Some people worry that if they buy our Latest 350-401 Exam Sims exam questions they may fail in the exam and the procedure of the refund is complicated.
We need to have more strength to get what we want, and 350-401 Cost Effective Certification exam dumps may give you these things. After you use our study materials, you can get 350-401 Cost Effective Certification certification, which will better show your ability, among many competitors, you will be very prominent. Using 350-401 Cost Effective Certification exam prep is an important step for you to improve your soft power.
Cisco 350-401 Cost Effective Certification - The more efforts you make, the luckier you are.
Goldmile-Infobiz's practice questions and answers about the Cisco certification 350-401 Cost Effective Certification exam is developed by our expert team's wealth of knowledge and experience, and can fully meet the demand of Cisco certification 350-401 Cost Effective Certification exam's candidates. From related websites or books, you might also see some of the training materials, but Goldmile-Infobiz's information about Cisco certification 350-401 Cost Effective Certification exam is the most comprehensive, and can give you the best protection. Candidates who participate in the Cisco certification 350-401 Cost Effective Certification exam should select exam practice questions and answers of Goldmile-Infobiz, because Goldmile-Infobiz is the best choice for you.
We have specific workers to be responsible for answering customers’ consultation about the 350-401 Cost Effective Certification learning materials. All our efforts are aimed to give the best quality of 350-401 Cost Effective Certification exam questions and best service to our customers.
350-401 PDF DEMO:
QUESTION NO: 1
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 2
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 3
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 4
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
SAP C-ARCIG-2508 - I wish you good luck. Please consider our Microsoft PL-200 learning quiz carefully and you will get a beautiful future with its help. Microsoft AZ-700-KR - If you use Goldmile-Infobiz'straining program, you can 100% pass the exam. There are a lot of advantages about the online version of the Salesforce Revenue-Cloud-Consultant-Accredited-Professional exam questions from our company. Databricks Associate-Developer-Apache-Spark-3.5 - The questions and answers provided by Goldmile-Infobiz is obtained through the study and practice of Goldmile-Infobiz IT elite.
Updated: May 28, 2022