The amazing quality of our 350-401 Free Test Questions learning questions can totally catch eyes of exam candidates with passing rate up to 98 to 100 percent. As one of the leading brand in the market, our 350-401 Free Test Questions exam materials can be obtained on our website within five minutes. As long as you pay for our 350-401 Free Test Questions study guide successfully, then you will receive it quickly. Goldmile-Infobiz offers you the best exam dump for Cisco certification i.e. actual 350-401 Free Test Questions brain dumps. As a result, 350-401 Free Test Questions real exam win worldwide praise and acceptance.
Cisco 350-401 Free Test Questions exam is a Technical Specialist exam.
Good practice on the success rate of 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Free Test Questions quiz guide is not fully indicate that you have mastered knowledge is skilled, therefore, the 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Free Test Questions test material let the user consolidate learning content as many times as possible, although the practice seems very boring, but it can achieve the result of good consolidate knowledge. Goldmile-Infobiz's Cisco Valid Braindumps 350-401 Free Download exam training materials have a part of free questions and answers that provided for you. You can try it later and then decide to take it or leave.
Our system provides safe purchase procedures to the clients and we guarantee the system won’t bring the virus to the clients’ computers and the successful payment for our 350-401 Free Test Questions learning file. Our system is strictly protect the clients’ privacy and sets strict interception procedures to forestall the disclosure of the clients’ private important information. Our system will automatically send the updates of the 350-401 Free Test Questions learning file to the clients as soon as the updates are available.
Cisco 350-401 Free Test Questions - All contents are passing rigid inspection.
In order to provide you with the best IT certification exam dumps forever, Goldmile-Infobiz constantly improve the quality of exam dumps and update the dumps on the basis of the latest test syllabus at any time. Goldmile-Infobiz is your best choice on the market today and is recognized by all candidates for a long time. If you don't believe what I say, you can know the information by asking around. Somebody must have been using Goldmile-Infobiz dumps. We assure Goldmile-Infobiz provide you with the latest and the best questions and answers which will let you pass the exam at the first attempt.
Also, it will display how many questions of the 350-401 Free Test Questions exam questions you do correctly and mistakenly. In a word, you can compensate for your weakness and change a correct review plan of the study materials.
350-401 PDF DEMO:
QUESTION NO: 1
Which statement about a fabric access point is true?
A. It is in local mode an must connected directly to the fabric edge switch.
B. It is in FlexConnect mode and must be connected directly to the fabric edge switch.
C. It is in FlexConnect mode and must be connected directly to the fabric border node.
D. It is in local mode an must be connected directly to the fabric border node.
Answer: A
Explanation:
Fabric mode APs continue to support the same wireless media services that traditional APs support; apply AVC, quality of service (QoS), and other wireless policies; and establish the CAPWAP control plane to the fabric WLC. Fabric APs join as local-mode APs and must be directly connected to the fabric edge node switch to enable fabric registration events, including RLOC assignment via the fabric
WLC. The fabric edge nodes use CDP to recognize APs as special wired hosts, applying special port configurations and assigning the APs to a unique overlay network within a common EID space across a fabric. The assignment allows management simplification by using a single subnet to cover the AP infrastructure at a fabric site.
Reference: https://www.cisco.com/c/en/us/td/docs/solutions/CVD/Campus/sda-sdg-2019oct.html
QUESTION NO: 2
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 3
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 4
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 5
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
SAP C_TS422_2504 - There are two versions of Goldmile-Infobiz dumps. The software version of the Fortinet FCSS_NST_SE-7.4 exam reference guide is very practical. Huawei H19-427_V1.0-ENU - Once you have checked our demo, you will find the study materials we provide are what you want most. Firstly, our pass rate for Microsoft MS-700 training guide is unmatched high as 98% to 100%. Have you ever tried our IT exam certification software provided by our Goldmile-Infobiz? If you have, you will use our CCE Global CPCE exam software with no doubt.
Updated: May 28, 2022