We are concentrating on the reform on the 350-401 Reliable Exam Cost exam material that our candidates try to get aid with. We own the profession experts on compiling the 350-401 Reliable Exam Cost practice questions and customer service on giving guide on questions from our clients. Our 350-401 Reliable Exam Cost preparation materials contain three versions: the PDF, the Software and the APP online. If you feel very nervous about exam, we think it is very necessary for you to use the software version of our 350-401 Reliable Exam Cost guide torrent. The simulated tests are similar to recent actual exams in question types and degree of difficulty. And our software of the 350-401 Reliable Exam Cost training material also allows different users to study at the same time.
CCNP Enterprise 350-401 You may try it!
No matter where you are, as long as you buy the 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Reliable Exam Cost real study dumps, we will provide you with the most useful and efficient learning materials. Our product is of high quality and the passing rate and the hit rate are both high. Nowadays the requirements for jobs are higher than any time in the past.
A generally accepted view on society is only the professionals engaged in professionally work, and so on, only professional in accordance with professional standards of study materials, as our Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) study questions, to bring more professional quality service for the user. Our study materials can give the user confidence and strongly rely on feeling, lets the user in the reference appendix not alone on the road, because we are to accompany the examinee on 350-401 Reliable Exam Cost exam, candidates need to not only learning content of teaching, but also share his arduous difficult helper, so believe us, we are so professional company.
Cisco 350-401 Reliable Exam Cost - They can be obtained within five minutes.
You may previously think preparing for the 350-401 Reliable Exam Cost practice exam will be full of agony; actually, you can abandon the time-consuming thought from now on. Our 350-401 Reliable Exam Cost exam question can be obtained within 5 minutes after your purchase and full of high quality points for your references, and also remedy your previous faults and wrong thinking of knowledge needed in this exam. As a result, many customers get manifest improvement and lighten their load by using our 350-401 Reliable Exam Cost latest dumps. You won’t regret your decision of choosing us. In contrast, they will inspire your potential. Besides, when conceive and design our 350-401 Reliable Exam Cost exam questions at the first beginning, we target the aim customers like you, a group of exam candidates preparing for the exam. Up to now, more than 98 percent of buyers of our 350-401 Reliable Exam Cost latest dumps have passed it successfully. Up to now they can be classified into three versions: the PDF, the software and the app version. So we give emphasis on your goals, and higher quality of our 350-401 Reliable Exam Cost test guide.
And besides, you can take it with you wherever you go for it is portable and takes no place. So the PDF version of our 350-401 Reliable Exam Cost exam questions is convenient.
350-401 PDF DEMO:
QUESTION NO: 1
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 2
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 3
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 4
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
So our EXIN PR2F exam questions mean more intellectual choice than other practice materials. We often ask, what is the purpose of learning? Why should we study? Why did you study for ServiceNow CIS-RCIexam so long? As many people think that, even if one day we forget the formula for the area of a triangle, we can still live very well, but if it were not for the knowledge of learning ServiceNow CIS-RCI exam and try to obtain certification, how can we have the opportunity to good to future life? So, the examination is necessary, only to get the test ServiceNow CIS-RCI certification, get a certificate, to prove better us, to pave the way for our future life. Our Workday Workday-Pro-Compensation exam braindumps are conductive to your future as a fairly reasonable investment. If you are willing to try our Fortinet FCSS_SASE_AD-24 study materials, we believe you will not regret your choice. Having a good command of processional knowledge in this line, they devised our high quality and high effective Ping Identity PAP-001 study materials by unremitting effort and studious research.
Updated: May 28, 2022