So before your purchase you can have an understanding of our product and then decide whether to buy our 350-401 Valid Exam Syllabus study questions or not. Before you buy our 350-401 Valid Exam Syllabus study questions you can have a free download and tryout and you can have an understanding of our product by visiting our pages of our product on the website. The pages of our 350-401 Valid Exam Syllabus guide torrent provide the demo and you can understand part of our titles and the form of our software. Cisco training pdf material is the valid tools which can help you prepare for the 350-401 Valid Exam Syllabus actual test. 350-401 Valid Exam Syllabus vce demo gives you the prep hints and important tips, helping you identify areas of weakness and improve both your conceptual knowledge and hands-on skills. The software version is one of the three versions of our 350-401 Valid Exam Syllabus exam prep.
CCNP Enterprise 350-401 Quickly, you will become the millionaire.
CCNP Enterprise 350-401 Valid Exam Syllabus - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) With all these products, your success is assured with 100% money back guarantee. Our New 350-401 Test Sample Online exam guide are cost-effective. As you may know that the windows software of the New 350-401 Test Sample Online study materials only supports windows operating system.
If you are a diligent person, we strongly advise you to try our 350-401 Valid Exam Syllabus real test. You will be attracted greatly by our 350-401 Valid Exam Syllabus practice engine. .
Cisco 350-401 Valid Exam Syllabus - People are engaged in modern society.
In order to allow our customers to better understand our 350-401 Valid Exam Syllabus quiz prep, we will provide clues for customers to download in order to understand our 350-401 Valid Exam Syllabus exam torrent in advance and see if our products are suitable for you. As long as you have questions, you can send us an email and we have staff responsible for ensuring 24-hour service to help you solve your problems. We do not charge extra service fees, but the service quality is high. Your satisfaction is the greatest affirmation for us and we sincerely serve you. Our 350-401 Valid Exam Syllabus exam guide deliver the most important information in a simple, easy-to-understand language that you can learn efficiently learn with high quality. Whether you are a student or an in-service person, our 350-401 Valid Exam Syllabus exam torrent can adapt to your needs.
One of the great advantages is that you will soon get a feedback after you finish the exercises. So you are able to adjust your learning plan of the 350-401 Valid Exam Syllabus guide test flexibly.
350-401 PDF DEMO:
QUESTION NO: 1
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 2
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 3
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 5
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
As an installable CompTIA N10-009 software application, it simulated the real CompTIA N10-009 exam environment, and builds 200-125 exam confidence. Microsoft AZ-900-KR - You can consult online no matter what problems you encounter. So feel relieved when you buy our F5 401 guide torrent. SAP C-S4CPB-2508 - I hope that you can spend a little time understanding what our study materials have to attract customers compared to other products in the industry. To become a well-rounded person with the help of our SAP C_S4CPB_2508 study questions, reducing your academic work to a concrete plan made up of concrete actions allows you to streamline and gain efficiency, while avoiding pseudo work and guilt.
Updated: May 28, 2022