By simulating actual test-taking conditions, we believe that you will relieve your nervousness before examination. So hurry to buy our 350-401 Latest Exam Questions Answers test questions, it will be very helpful for you to pass your exam and get your certification. Our company provides three different versions to choice for our customers. And our software of the 350-401 Latest Exam Questions Answers training material also allows different users to study at the same time. It's economical for a company to buy it for its staff. All necessary elements are included in our 350-401 Latest Exam Questions Answers practice materials.
CCNP Enterprise 350-401 However, our company has achieved the goal.
It is understandable that many people give their priority to use paper-based 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Latest Exam Questions Answers materials rather than learning on computers, and it is quite clear that the PDF version is convenient for our customers to read and print the contents in our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Latest Exam Questions Answers study guide. We have designed a specific module to explain various common questions such as installation, passing rate and so on. If you still have other questions about our Latest Exam Camp 350-401 File exam questions, you can contact us directly via email or online, and we will help you in the first time with our kind and professional suggestions.
Our 350-401 Latest Exam Questions Answers study materials are not only as reasonable priced as other makers, but also they are distinctly superior in the many respects. With tens of thousands of our loyal customers supporting us all the way, we believe we will do a better job in this career. More and more candidates will be benefited from our excellent 350-401 Latest Exam Questions Answers training guide!
Cisco 350-401 Latest Exam Questions Answers - In fact, we never cheat on customers.
What was your original intention of choosing a product? I believe that you must have something you want to get. 350-401 Latest Exam Questions Answers exam materials allow you to have greater protection on your dreams. This is due to the high passing rate of our 350-401 Latest Exam Questions Answers study questions which is high as 98% to 100%. And our 350-401 Latest Exam Questions Answers exam questions own a high quality which is easy to understand and practice. At the same time, our price is charming. Just come and buy it!
As long as you need the exam, we can update the Cisco certification 350-401 Latest Exam Questions Answers exam training materials to meet your examination needs. Goldmile-Infobiz's training materials contain many practice questions and answers about Cisco 350-401 Latest Exam Questions Answers and they can 100% ensure you pass Cisco 350-401 Latest Exam Questions Answers exam.
350-401 PDF DEMO:
QUESTION NO: 1
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 2
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 3
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 4
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 5
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
The series of ACAMS CAMS-CN measures we have taken is also to allow you to have the most professional products and the most professional services. Now passing Cisco certification HP HPE2-E84 exam is not easy, so choosing a good training tool is a guarantee of success. BCS PC-BA-FBA-20 - What are you waiting for? Through the Cisco certification Salesforce MCE-Admn-201 exam method has a lot of kinds, spend a lot of time and energy to review the Cisco certification Salesforce MCE-Admn-201 exam related professional knowledge is a kind of method, through a small amount of time and money Goldmile-Infobiz choose to use the pertinence training and exercises is also a kind of method. ISA ISA-IEC-62443 - This kind of learning method is very convenient for the user, especially in the time of our fast pace to get Cisco certification.
Updated: May 28, 2022