All customers can feel comfortable when they choose to buy our 350-401 New Test Collection File study tool. We have specialized software to prevent the leakage of your information and we will never sell your personal information because trust is the foundation of cooperation between both parties. A good reputation is the driving force for our continued development. With our 350-401 New Test Collection File learning questions, you can enjoy a lot of advantages over the other exam providers’. The most attraction aspect is that our high pass rate of our 350-401 New Test Collection File study materials as 98% to 100%. As a consequence of these problem, our 350-401 New Test Collection File test prep is totally designed for these study groups to improve their capability and efficiency when preparing for Cisco exams, thus inspiring them obtain the targeted 350-401 New Test Collection File certificate successfully.
CCNP Enterprise 350-401 Join us and you will be one of them.
Carefully testing and producing to match the certified quality standards of 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) New Test Collection File exam materials, we have made specific statistic researches on the 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) New Test Collection File practice materials. To be convenient for the learners, our 350-401 Exam Sample Online certification questions provide the test practice software to help the learners check their learning results at any time. Our 350-401 Exam Sample Online study practice guide takes full account of the needs of the real exam and conveniences for the clients.
Our online staff is professionally trained and they have great knowledge on the 350-401 New Test Collection File study guide. So they can clearly understand your requirements and ideas and then help you make the right choices. When you have purchased our 350-401 New Test Collection File exam practice, but you do not know how to install it, we can also provide remote guidance to help you complete the installation.
Cisco 350-401 New Test Collection File - It is quite convenient.
350-401 New Test Collection File practice exam will provide you with wholehearted service throughout your entire learning process. This means that unlike other products, the end of your payment means the end of the entire transaction our 350-401 New Test Collection File learning materials will provide you with perfect services until you have successfully passed the 350-401 New Test Collection File exam. And if you have any questions, just feel free to us and we will give you advice on 350-401 New Test Collection File study guide as soon as possible.
If you are better, you will have a more relaxed life. 350-401 New Test Collection File guide materials allow you to increase the efficiency of your work.
350-401 PDF DEMO:
QUESTION NO: 1
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 2
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 3
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 4
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 5
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
Maybe you want to keep our IIA IIA-CIA-Part3-CN exam guide available on your phone. As long as the users choose to purchase our GIAC GCIH exam dumps, there is no doubt that he will enjoy the advantages of the most powerful update. Scrum SAFe-Practitioner - It’s like buying clothes, you only know if it is right for you when you try it on. Real Estate New-Jersey-Real-Estate-Salesperson - Users can not only learn new knowledge, can also apply theory into the actual problem, but also can leak fill a vacancy, can say such case selection is to meet, so to grasp the opportunity! You can use your smart phones, laptops, the tablet computers or other equipment to download and learn our Cisco 300-620 learning dump.
Updated: May 28, 2022