Goldmile-Infobiz에서 출시한 Cisco 인증 350-401인증문제시험덤프는Goldmile-Infobiz의 엘리트한 IT전문가들이 IT인증실제시험문제를 연구하여 제작한 최신버전 덤프입니다. 덤프는 실제시험의 모든 범위를 커버하고 있어 시험통과율이 거의 100%에 달합니다. 제일 빠른 시간내에 덤프에 있는 문제만 잘 이해하고 기억하신다면 시험패스는 문제없습니다. 인재가 넘치는 IT업계에서 자기의 자리를 지켜나가려면 학력보다 능력이 더욱 중요합니다.고객님의 능력을 증명해주는 수단은 국제적으로 승인받은 IT인증자격증이 아니겠습니까? Cisco인증 350-401인증문제시험이 어렵다고 하여 두려워 하지 마세요. IT자격증을 취득하려는 분들의 곁에는Goldmile-Infobiz가 있습니다. Cisco인증 350-401인증문제시험덤프의 인기는 이 시험과목이 얼마나 중요한지를 증명해줍니다.
CCNP Enterprise 350-401 Goldmile-Infobiz시험문제와 답이야 말로 퍼펙트한 자료이죠.
Goldmile-Infobiz의 Cisco인증 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR)인증문제덤프를 공부하여Cisco인증 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR)인증문제시험을 패스하는건 아주 간단한 일입니다.저희 사이트에서 제작한Cisco인증 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR)인증문제덤프공부가이드는 실제시험의 모든 유형과 범위가 커버되어있어 높은 적중율을 자랑합니다.시험에서 불합격시 덤프비용은 환불신청 가능하기에 안심하고 시험준비하시면 됩니다. 인기가 높은 만큼Cisco 350-401 최신덤프문제시험을 패스하여 취득하게 되는 자격증의 가치가 높습니다. 이렇게 좋은 자격증을 취득하는데 있어서의 필수과목인Cisco 350-401 최신덤프문제시험을 어떻게 하면 한번에 패스할수 있을가요? 그 비결은 바로Goldmile-Infobiz의 Cisco 350-401 최신덤프문제덤프를 주문하여 가장 빠른 시일내에 덤프를 마스터하여 시험을 패스하는것입니다.
Cisco인증 350-401인증문제시험을 패스하여 자격증을 취득하는게 꿈이라구요? Goldmile-Infobiz에서 고객님의Cisco인증 350-401인증문제시험패스꿈을 이루어지게 지켜드립니다. Goldmile-Infobiz의 Cisco인증 350-401인증문제덤프는 가장 최신시험에 대비하여 만들어진 공부자료로서 시험패스는 한방에 끝내줍니다.
우리는 꼭 한번에Cisco Cisco 350-401인증문제시험을 패스할 수 있도록 도와드릴 것입니다.
많은 사이트에서Cisco 인증350-401인증문제 인증시험대비자료를 제공하고 있습니다. 그중에서 Goldmile-Infobiz를 선택한 분들은Cisco 인증350-401인증문제시험통과의 지름길에 오른것과 같습니다. Goldmile-Infobiz는 시험에서 불합격성적표를 받으시면 덤프비용을 환불하는 서비스를 제공해드려 아무런 걱정없이 시험에 도전하도록 힘이 되어드립니다. Goldmile-Infobiz덤프를 사용하여 시험에서 통과하신 분이 전해주신 희소식이 Goldmile-Infobiz 덤프품질을 증명해드립니다.
Cisco인증350-401인증문제시험을 패스하여 자격증을 취득한다면 여러분의 미래에 많은 도움이 될 것입니다.Cisco인증350-401인증문제시험자격증은 it업계에서도 아주 인지도가 높고 또한 알아주는 시험이며 자격증 하나로도 취직은 문제없다고 볼만큼 가치가 있는 자격증이죠.Cisco인증350-401인증문제시험은 여러분이 it지식테스트시험입니다.
350-401 PDF DEMO:
QUESTION NO: 1
Which description of an SD-Access wireless network infrastructure deployment is true?
A. The wireless client is part of the fabric overlay.
B. The access point is part of the fabric underlay.
C. The WLC is part of the fabric underlay.
D. The access point is part the fabric overlay.
Answer: B
QUESTION NO: 2
Which statement about a fabric access point is true?
A. It is in local mode an must connected directly to the fabric edge switch.
B. It is in FlexConnect mode and must be connected directly to the fabric edge switch.
C. It is in FlexConnect mode and must be connected directly to the fabric border node.
D. It is in local mode an must be connected directly to the fabric border node.
Answer: A
Explanation:
Fabric mode APs continue to support the same wireless media services that traditional APs support; apply AVC, quality of service (QoS), and other wireless policies; and establish the CAPWAP control plane to the fabric WLC. Fabric APs join as local-mode APs and must be directly connected to the fabric edge node switch to enable fabric registration events, including RLOC assignment via the fabric
WLC. The fabric edge nodes use CDP to recognize APs as special wired hosts, applying special port configurations and assigning the APs to a unique overlay network within a common EID space across a fabric. The assignment allows management simplification by using a single subnet to cover the AP infrastructure at a fabric site.
Reference: https://www.cisco.com/c/en/us/td/docs/solutions/CVD/Campus/sda-sdg-2019oct.html
QUESTION NO: 3
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 4
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
경쟁율이 심한 IT시대에 Cisco Real Estate Licensing Virginia-Real-Estate-Salesperson시험 패스만으로 이 사회에서 자신만의 위치를 보장할수 있고 더욱이는 한층 업된 삶을 누릴수도 있습니다. Goldmile-Infobiz에는Cisco Pegasystems PEGACPDS25V1인증시험의 특별한 합습가이드가 있습니다. Cisco Fortinet FCSS_ADA_AR-6.7 시험가이드를 사용해보지 않으실래요? Goldmile-Infobiz는 여러분께Cisco Fortinet FCSS_ADA_AR-6.7시험패스의 편리를 드릴 수 있다고 굳게 믿고 있습니다. Cisco 인증Oracle 1z0-1057-25덤프 무료샘플을 다운받아 체험해보세요. Goldmile-Infobiz의Cisco SCDM CCDM 인증시험덤프는 자주 업데이트 되고, 오래 되고 더 이상 사용 하지 않는 문제들은 바로 삭제해버리며 새로운 최신 문제들을 추가 합니다.
Updated: May 28, 2022