350-401在線題庫,Cisco 350-401證照資訊 & Implementing Cisco Enterprise Network Core Technologies 350-401 Encor - Goldmile-Infobiz

為什麼Goldmile-Infobiz能得到大家的信任呢?那是因為Goldmile-Infobiz有一個IT業界的精英團體,他們一直致力於為大家提供最優秀的考試資料。因此,Goldmile-Infobiz可以给大家提供更多的优秀的参考书,以满足大家的需要。Goldmile-Infobiz是一個學習IT技術的人們都知道的網站。 Goldmile-Infobiz還會為你提供一年的免費更新服務。Goldmile-Infobiz不僅可靠性強,而且服務也很好。 Goldmile-Infobiz的350-401在線題庫考古題是一個保證你一次及格的資料。

CCNP Enterprise 350-401 準備考試的時候學習與考試相關的知識是很有必要的。

你是大智大勇的人嗎?如果你的IT認證考試沒有做好考前準備,你還處之泰然嗎?當然,因為你有 Goldmile-Infobiz Cisco的350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR)在線題庫考試培訓資料在手上,任何考試困難都不會將你打到。 Goldmile-Infobiz的350-401 權威考題考古題可以給你通過考試的自信,讓你輕鬆地迎接考試。利用這個考古題,只要你經過很短時間段額準備你就可以通過考試。

那麼,在IT領域工作的你,當然是應該選擇參加IT認定考試獲得認證資格了。因為這樣可以更好地提升你自己。而且,最重要的是,你也可以向別人證明你掌握了更多的工作技能。

當你選擇Cisco 350-401在線題庫考試時有沒有選擇相關的考試課程?

我們都很清楚 Cisco 350-401在線題庫 認證考試在IT行業中的地位是駐足輕重的地位,但關鍵的問題是能夠拿到Cisco 350-401在線題庫的認證證書不是那麼簡單的。我們很清楚地知道網上缺乏有高品質的準確性高的相關考試資料。Goldmile-Infobiz的考試練習題和答案可以為一切參加IT行業相關認證考試的人提供一切所急需的資料。它能時時刻刻地提供你們想要的資料,購買我們所有的資料能保證你通過你的第一次Cisco 350-401在線題庫認證考試。

選擇使用Goldmile-Infobiz提供的產品,你踏上了IT行業巔峰的第一步,離你的夢想更近了一步。Goldmile-Infobiz為你提供的測試資料不僅能幫你通過Cisco 350-401在線題庫認證考試和鞏固你的專業知識,而且還能給你你提供一年的免費更新服務。

350-401 PDF DEMO:

QUESTION NO: 1
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.

QUESTION NO: 2
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.

QUESTION NO: 3
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.

QUESTION NO: 4
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D

QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html

Goldmile-Infobiz能夠幫你簡單地通過Cisco Real Estate New-Jersey-Real-Estate-Salesperson認證考試。 通過Goldmile-Infobiz你可以獲得最新的關於Cisco Esri EUNA_2024 認證考試的練習題和答案。 Cisco Linux Foundation KCSA考試軟體是Goldmile-Infobiz研究過去的真實的考題開發出來的。 在如今時間那麼寶貴的社會裏,我建議您來選擇Goldmile-Infobiz為您提供的短期培訓,你可以花少量的時間和金錢就可以通過您第一次參加的Cisco CMAA Construction-Manager 認證考試。 ISACA CRISC - 在這個競爭激烈的IT行業中,擁有一些認證證書是可以幫助你步步高升的。

Updated: May 28, 2022