我們Goldmile-Infobiz Cisco的350-401考試資訊考試培訓資料是最佳的培訓資料，如果你是IT人員，它將是你必選的培訓資料，不要拿你的未來來賭明天，Goldmile-Infobiz Cisco的350-401考試資訊考試培訓資料絕對值得信賴，我們是專門給全世界的IT認證的考生提供培訓資料的，包括試題及答案，實現 Cisco的350-401考試資訊考試認證，是許多IT和網路專業人士的目標，Goldmile-Infobiz的合格率是難以置信的高，在Goldmile-Infobiz，我們致力於你不斷的取得成功。 只要你用了它你就會發現，這一切都是真的。Goldmile-Infobiz的350-401考試資訊考古題是你準備350-401考試資訊認證考試時最不能缺少的資料。 這也導致在IT行業工作的人越來越多。
可以讓你一次就通過考試的優秀的350-401考試資訊考試資料出現了。
如果你不想因為考試浪費太多的時間與精力，那麼Goldmile-Infobiz的350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR)考試資訊考古題無疑是你最好的選擇。 這個考古題可以讓你更準確地瞭解考試的出題點，從而讓你更有目的地學習相關知識。另外，如果你實在沒有準備考試的時間，那麼你只需要記好這個考古題裏的試題和答案。
Goldmile-Infobiz網站在通過350-401考試資訊資格認證考試的考生中有著良好的口碑。這是大家都能看得到的事實。Goldmile-Infobiz以它強大的考古題得到人們的認可，只要你選擇它作為你的考前復習工具，就會在350-401考試資訊資格考試中有非常滿意的收穫，這也是大家有目共睹的。
而且通過 Cisco Cisco 350-401考試資訊 認證考試也不是很簡單的。
Goldmile-Infobiz是個可以為所有有關於IT認證考試提供資料的網站。Goldmile-Infobiz可以為你提供最好最新的考試資源。選擇Goldmile-Infobiz你可以安心的準備你的Cisco 350-401考試資訊考試。我們的培訓才料可以保證你100%的通過Cisco 350-401考試資訊認證考試，如果沒有通過我們將全額退款並且會迅速的更新考試練習題和答案，但這幾乎是不可能發生的。Goldmile-Infobiz可以為你通過Cisco 350-401考試資訊的認證考試提供幫助，也可以為你以後的工作提供幫助。雖然有很多方法可以幫你達到你的這些目的，但是選擇Goldmile-Infobiz是你最明智的選擇，Goldmile-Infobiz可以使你花時間更短金錢更少並且更有把握地通過考試，而且我們還會為你提供一年的免費售後服務。
為了通過Cisco 350-401考試資訊 認證考試，請選擇我們的Goldmile-Infobiz來取得好的成績。你不會後悔這樣做的，花很少的錢取得如此大的成果這是值得的。
350-401 PDF DEMO:
QUESTION NO: 1
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 2
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 3
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 4
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 5
Which statement about a fabric access point is true?
A. It is in local mode an must connected directly to the fabric edge switch.
B. It is in FlexConnect mode and must be connected directly to the fabric edge switch.
C. It is in FlexConnect mode and must be connected directly to the fabric border node.
D. It is in local mode an must be connected directly to the fabric border node.
Answer: A
Explanation:
Fabric mode APs continue to support the same wireless media services that traditional APs support; apply AVC, quality of service (QoS), and other wireless policies; and establish the CAPWAP control plane to the fabric WLC. Fabric APs join as local-mode APs and must be directly connected to the fabric edge node switch to enable fabric registration events, including RLOC assignment via the fabric
WLC. The fabric edge nodes use CDP to recognize APs as special wired hosts, applying special port configurations and assigning the APs to a unique overlay network within a common EID space across a fabric. The assignment allows management simplification by using a single subnet to cover the AP infrastructure at a fabric site.
Reference: https://www.cisco.com/c/en/us/td/docs/solutions/CVD/Campus/sda-sdg-2019oct.html
如果你購買了我們提供的Cisco Amazon DOP-C02-KR認證考試相關的培訓資料，你是可以成功地通過Cisco Amazon DOP-C02-KR認證考試。 Cisco CSI CSC2 認證證書對在IT行業中的你工作是很有幫助的，對你的職位和工資有很大提升，讓你的生活更有保障。 Goldmile-Infobiz能夠幫你100%通過Cisco Splunk SPLK-4001 認證考試，如果你不小心沒有通過Cisco Splunk SPLK-4001 認證考試，我們保證會全額退款。 Ping Identity PAP-001 - 在你使用之後，相信你會很滿意我們的產品的。 Goldmile-Infobiz可以讓你不需要花費那麼多時間，金錢和精力，Goldmile-Infobiz會為你提供針對性訓練來準備Cisco Fortinet FCSS_SASE_AD-24認證考試，僅需大約20個小時你就能通過考試。
Updated: May 28, 2022