不需要大量的時間和金錢，僅需30個小時左右的特殊培訓，你就能輕鬆通過你的第一次參加的Cisco 350-401考古題 認證考試。Goldmile-Infobiz能為你提供與真實的考試題目有緊密相似性的考試練習題。 每個需要通過IT考試認證的考生都知道，這次的認證關係著他們人生的重大轉變，我們Goldmile-Infobiz提供的考試認證培訓資料是用超低的價格和高品質的擬真試題和答案來奉獻給廣大考生，我們的產品還具備成本效益，並提供了一年的免費更新期，我們認證培訓資料都是現成的。我們網站是答案轉儲的領先供應商，我們有你們需要的最新最準確的考試認證培訓資料，也就是答案和考題。 快將我們Goldmile-Infobiz加入你的購車吧。
Cisco的350-401考古題考試認證將會從遙不可及變得綽手可得。
CCNP Enterprise 350-401考古題 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) 这样在考试时你就可以轻松自如地应对了。 如果你因為準備Cisco的新版 350-401 考古題考試而感到很累的話，那麼你千萬不能錯過Goldmile-Infobiz的新版 350-401 考古題資料。因為這是個高效率的準備考試的工具。
Goldmile-Infobiz的350-401考古題考古題是經過眾多考生檢驗過的資料，可以保證有很高的成功率。如果你用過考古題以後仍然沒有通過考試，Goldmile-Infobiz會全額退款。或者你也可以選擇為你免費更新考試考古題。
你很快就可以獲得Cisco Cisco 350-401考古題 認證考試的證書。
如果你想成功通過350-401考古題認證考試，不要錯過閱讀Goldmile-Infobiz最新的350-401考古題考古題資料，100%保證通過，所有的題庫都會及時更新。使用我們軟件版本的350-401考古題題庫可以幫您評估自己掌握的知識點，從而在考試期間增加問題的回憶，幫助快速完成考試。Cisco 350-401考古題考題具備了覆蓋率很高，能夠消除考生對考試的疑慮。350-401考古題是一個很難通過的認證考試，要想通過考試必須為考試做好充分的準備，而Goldmile-Infobiz是您最佳的選擇！
IT行業中很多雄心勃勃的專業人士為了在IT行業中能更上一層樓，離IT頂峰更近一步，都會選擇Cisco 350-401考古題這個難度較高的認證考試來獲取通認證證書從而獲得行業認可。Cisco 350-401考古題 的難度比較高所以通過率也比較低。
350-401 PDF DEMO:
QUESTION NO: 1
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 2
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 3
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 5
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
你還在為通過Cisco Salesforce MC-101認證考試難度大而煩惱嗎？你還在為了通過Cisco Salesforce MC-101認證考試廢寢忘食的努力復習嗎？想更快的通過Cisco Salesforce MC-101認證考試嗎？快快選擇我們Goldmile-Infobiz吧！有了他可以迅速的完成你的夢想。 你是可以免費下載Goldmile-Infobiz為你提供的部分關於Cisco Python Institute PCAP-31-03認證考試練習題及答案的作為嘗試，那樣你會更有信心地選擇我們的Goldmile-Infobiz的產品來準備你的Cisco Python Institute PCAP-31-03 認證考試。 Fortinet FCP_FSM_AN-7.2 - 所以很多IT專業人士通過一些比較難的權威的IT認證考試來穩固自己，而我們Goldmile-Infobiz是專門為參加IT認證考試的考生提供便利的。 你可以先在我們的網站上免費下載部分部分關於Cisco ECCouncil 212-82 認證考試的練習題和答案作為免費嘗試，以便你可以檢驗我們的可靠性。 或許其他網站也提供Cisco SAP C-THR81-2505 認證考試的相關資料，但如果你相互比較你就會發現Goldmile-Infobiz提供的資料是最全面，品質最高的，而且其他網站的大部分資料主要來源於Goldmile-Infobiz。
Updated: May 28, 2022