To avoid being washed out by the artificial intelligence, we must keep absorbing various new knowledge. Our 350-401 Free learning questions will inspire your motivation to improve yourself. Tens of thousands of our loyal customers are benefited from our 350-401 Free study materials and lead a better life now after they achieve their 350-401 Free certification. To other workers who want to keep up with the time and being competent in today’s world, you are also looking for some effective 350-401 Free exam prep as well. Without voluminous content to remember, our 350-401 Free practice materials contain what you need to know and what the exam want to test, So our 350-401 Free real exam far transcend others in market. You just need to pay the relevant money for the 350-401 Free practice materials.
Our 350-401 Free practice quiz is unique in the market.
During the exam, you would be familiar with the questions, which you have practiced in our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Free question dumps. And our website has already became a famous brand in the market because of our reliable 350-401 Latest Test Syllabus exam questions. Different from all other bad quality practice materials that cheat you into spending much money on them, our 350-401 Latest Test Syllabus exam materials are the accumulation of professional knowledge worthy practicing and remembering.
We will provide high quality assurance of 350-401 Free exam questions for our customers with dedication to ensure that we can develop a friendly and sustainable relationship. First of all, we have security and safety guarantee, which mean that you cannot be afraid of virus intrusion and information leakage since we have data protection acts, even though you end up studying 350-401 Free test guide of our company, we will absolutely delete your personal information and never against ethic code to sell your message to the third parties. Secondly, our 350-401 Free exam questions will spare no effort to perfect after-sales services.
Cisco 350-401 Free - Then they will receive our mails in 5-10 minutes.
As we all know, 350-401 Free certificates are an essential part of one’s resume, which can make your resume more prominent than others, making it easier for you to get the job you want. For example, the social acceptance of 350-401 Free certification now is higher and higher. If you also want to get this certificate to increase your job opportunities, please take a few minutes to see our 350-401 Free training materials.
It will be your great loss to miss our 350-401 Free practice engine. Once you compare our 350-401 Free study materials with the annual real exam questions, you will find that our 350-401 Free exam questions are highly similar to the real exam questions.
350-401 PDF DEMO:
QUESTION NO: 1
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 2
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 3
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 4
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 5
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
And our VMware 2V0-13.25 leanring guide can help you get all of the keypoints and information that you need to make sure that you will pass the exam. PMI PMI-CPMAI - Successful people are never satisfying their current achievements. But you don't have to worry about this when buying our Microsoft MD-102 actual exam. Cisco 200-301 - We can promise that our study materials will be very useful and helpful for you to prepare for your exam. They are a small part of the questions and answers of the SAP C-SIGPM-2403 learning quiz.
Updated: May 28, 2022