Although Cisco certification 350-401 Exam Fee exam is difficult, through doing Goldmile-Infobiz's exercises you will be very confident for the exam. Be assured to choose Goldmile-Infobiz efficient exercises right now, and you will do a full preparation for Cisco certification 350-401 Exam Fee exam. Whole Goldmile-Infobiz's pertinence exercises about Cisco certification 350-401 Exam Fee exam is very popular. A lot of people want to pass Cisco certification 350-401 Exam Fee exam to let their job and life improve, but people participated in the Cisco certification 350-401 Exam Fee exam all knew that Cisco certification 350-401 Exam Fee exam is not very simple. In order to pass Cisco certification 350-401 Exam Fee exam some people spend a lot of valuable time and effort to prepare, but did not succeed. You can free download part of practice questions and answers about Cisco certification 350-401 Exam Fee exam as a try to test the reliability of Goldmile-Infobiz's products.
CCNP Enterprise 350-401 Goldmile-Infobiz is worthy your trust.
To help you get the Cisco exam certification, we provide you with the best valid 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Exam Fee pdf prep material. New 350-401 Dumps Book exam seems just a small exam, but to get the New 350-401 Dumps Book certification exam is to be reckoned in your career. Such an international certification is recognition of your IT skills.
To ensure your 100% satisfaction, 350-401 Exam Fee free demo are available for the certification exam you're going to take before you purchased. All our 350-401 Exam Fee dumps collection is quite effectively by millions of people that passed 350-401 Exam Fee real exam and become professionals in IT filed. You will never regret choosing our 350-401 Exam Fee test answers as your practice materials because we will show you the most authoritative study guide.
Cisco 350-401 Exam Fee - So just come and have a try!
Our 350-401 Exam Fee exam dumps strive for providing you a comfortable study platform and continuously explore more functions to meet every customer’s requirements. We may foresee the prosperous talent market with more and more workers attempting to reach a high level through the Cisco certification. To deliver on the commitments of our 350-401 Exam Fee test prep that we have made for the majority of candidates, we prioritize the research and development of our 350-401 Exam Fee test braindumps, establishing action plans with clear goals of helping them get the Cisco certification. You can totally rely on our products for your future learning path. Full details on our 350-401 Exam Fee test braindumps are available as follows.
It is a package of 350-401 Exam Fee braindumps that is prepared by the proficient experts. These 350-401 Exam Fee exam questions dumps are of high quality and are designed for the convenience of the candidates.
350-401 PDF DEMO:
QUESTION NO: 1
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 2
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 3
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 4
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
We have developed three versions of our Salesforce Rev-Con-201 exam questions. We trounce many peers in this industry by our justifiably excellent Fortinet FCSS_SDW_AR-7.6 training guide and considerate services. The advantages of our ITIL ITIL-4-Transition guide dumps are too many to count. We all know that pass the PMI PMP-CN exam will bring us many benefits, but it is not easy for every candidate to achieve it. Our The Open Group OGBA-101 training materials have been honored as the panacea for the candidates for the exam since all of the contents in the The Open Group OGBA-101 guide quiz are the essences of the exam.
Updated: May 28, 2022