It is certain that the pass rate of our 350-401 Learning Materials study guide among our customers is the most essential criteria to check out whether our 350-401 Learning Materials training materials are effective or not. The good news is that according to statistics, under the help of our 350-401 Learning Materials learning dumps, the pass rate among our customers has reached as high as 98% to 100%. It is strongly proved that we are professonal in this career and our 350-401 Learning Materials exam braindumps are very popular. Our website is the first choice among IT workers, especially the ones who are going to take 350-401 Learning Materials certification exam in their first try. It is well known that getting certified by 350-401 Learning Materials real exam is a guaranteed way to succeed with IT careers. We provide the best service to the client and hope the client can be satisfied.
CCNP Enterprise 350-401 All in all, learning never stops!
In addition, the 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Learning Materials exam guide function as a time-counter, and you can set fixed time to fulfill your task, so that promote your efficiency in real test. As old saying goes, all roads lead to Rome. If you are still looking for your real interests and have no specific plan, our 350-401 New Practice Questions Files exam questions can be your new challenge.
Many people worry about buying electronic products on Internet, like our 350-401 Learning Materials preparation quiz, we must emphasize that our 350-401 Learning Materials simulating materials are absolutely safe without viruses, if there is any doubt about this after the pre-sale, we provide remote online guidance installation of our 350-401 Learning Materials exam practice. It is worth noticing that some people who do not use professional anti-virus software will mistakenly report the virus.
Cisco 350-401 Learning Materials - So our system is great.
Your eligibility of getting a high standard of career situation will be improved if you can pass the exam, and our 350-401 Learning Materials study guide are your most reliable ways to get it. You can feel assertive about your exam with our 100 guaranteed professional 350-401 Learning Materials practice engine for you can see the comments on the websites, our high-quality of our 350-401 Learning Materials learning materials are proved to be the most effective exam tool among the candidates.
You will have the right to start to try to simulate the real examination. We believe that the 350-401 Learning Materials study materials from our company will not let you down.
350-401 PDF DEMO:
QUESTION NO: 1
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 2
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 3
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 4
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 5
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID
So your personal effort is brilliant but insufficient to pass the Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) exam and our Microsoft MS-900 test guide can facilitate the process smoothly & successfully. Huawei H12-811_V1.0-ENU - Our {CertName} guide braindumps are the most popular products in the market now. CompTIA 220-1102 - All knowledge is based on the real exam by the help of experts. Fortinet FCSS_ADA_AR-6.7 - As the old saying goes, practice is the only standard to testify truth. Microsoft MB-330 - They often encounter situations in which the materials do not match the contents of the exam that make them waste a lot of time and effort.
Updated: May 28, 2022